You are here: > Home > News > >

News

  • [2015-05-28]Aluminum Foil’s Precautions
    What should we pay attention to transport? Trunk of transportation includes cars, trains, ships and other means of transport . During transport, to prohibit the use of aluminum foil with the active chemical products and wet material mixed, and should ...
  • [2015-05-28]The five stages of promoting the rapid development of the domestic aluminum indus
    Our aluminum industry from the beginning of the 1930s, the development of aluminum foil can be divided into five stages: 1932--1960 years infancy. 1961--1979 years of self-reliance development of small aluminum foil plant stage 1980--1999 years of rap ...
  • [2015-05-26]5052 Aluminum Alloy Sheet
    5052 aluminum alloy sheet main alloying elements of magnesium and aluminum, used in modern construction industry in many, is the most promising alloys, using a wide range. 5052 aluminum alloy has good processing properties, corrosion resistance, good ...
  • [2015-05-26]Aluminum Foil Anti-Corrosion Measures
    Anti-corrosion measures are as follows: (1) Strengthen the management of the air dryer; make sure that the compressed air dry. (2) Strengthen the management of rolling oil, its moisture control in 400x10-6 less. (3) Aluminum foil packaging should be ...
  • [2015-05-25]The Features of Metal Foil
    Abstract: The metal foil self-adhesive waterproof membrane surface using a metal foil (both soft metal film) to make the surface of the metal foil with a moisture-proof, airtight, heat insulation, anti-suns ultraviolet light, abrasion resistance and ...
  • [2015-05-25]Eight metal elements affecting the performance of Aluminum alloy
    Affect the performance of the eight aluminum alloy elements are: vanadium, calcium, lead, tin, bismuth, antimony, beryllium and sodium and other metallic elements, since according to the finished aluminum coil uses a different process in the added el ...
  • [2015-05-22]The Knowledge Before Casting Ingots
    Because in the cell in the Friends of liquid aluminum many impurities, it must filtration before casting ingot. It is reported that common methods include: First, solvent purification method is to use a solvent added to the solution; the solvent has ...
  • [2015-05-22]The Process of Aluminum Anodizing
    There are many methods of aluminum and its alloys anodization, here introduces common sulfuric acid anodizing. There are other chromic anodic oxidation anodizing, oxalic acid anodizing, hard anodizing, ceramic anodizing aluminum and its alloys. Sulfu ...
  • [2015-05-20]Different Aluminum Surface Treatment Techniques
    Multi-tone aluminum surface treatment: Currently monotonous silver and brown can not meet the architects and the exterior decorative tile, exterior wall latex of a good match, the new stainless steel color, champagne, gold, titanium color, red series ...