You are here: > Home > News > >

News

  • [2015-07-15]Grade and Application of Vanadium Aluminum Alloy
    Appearance: silver grey metallic luster block, with increasing vanadium content in the alloy, enhance its metallic luster, hardness increases, oxygen content raise. Vanadium content 85%, the product is not easy to break, the long-term storage surface ...
  • [2015-07-15]Electrolytic Aluminum Process
    The process of aluminum electrolysis process: modern aluminum industry production by cryolite alumina by molten salt electrolysis. Molten cryolite is solvent, alumina as solute, with carbon as the anode, aluminum melt as cathode, powerful DC. In 950 ...
  • [2015-07-15]Standard Analysis of Aluminum Alloy Materials
    Because aluminum alloy cable is to new material of aluminum alloy conductor, so the most authoritative national energy industry standard the rated voltage 0.61kV aluminum alloy conductor cross-linked polyethylene insulation cable door of technical se ...
  • [2015-07-15] The Installation Process of Aluminum Ceiling
    1 Construction Technology Play the line, the installation of the boom; install the main keel, the installation of the keel, the arch from the leveling, and the installation of aluminum ceiling . 2 construction method (1) according to the drawing firs ...
  • [2015-07-15] Technical Analysis of Electroplating Process for Aluminum Products
    After the end of the pre disposal of the plating on the aluminum products , the process can be entered into the aluminum. Regardless of which kind of pre disposal method, after the end of the first step into the plating process is flash copper platin ...
  • [2015-07-15]Aluminum Alloy Smelting Process
    1. Charge treatment All need to charge preheating before entering furnace, to remove the surface of the water, shorten the melting time. 2. Crucible and melting tool preparation (1) new crucible before use should be clean and carefully check without ...
  • [2015-07-13]Application of Al Si Alloy
    Al Si alloy is a kind of forging and casting alloy with aluminum and silicon as the main component. Generally it contains silicon 11%. At the same time, a small amount of copper, iron and nickel are added to improve the strength. Its density of 2.6 ~ ...
  • [2015-07-13]Composition Adjustment of Aluminum Alloy
    In the smelting process, metal elements were due to their oxidation and reduced, they are the degree of oxidation of many, not only with the size of its affinity to oxygen on the outside, and the elements in the alloy liquid concentration (activity), ...
  • [2015-07-13]Performance Characteristics of DBY Aluminum Alloy Electric Diaphragm Pump
    Aluminum alloy type DBY electric diaphragm pump working principle is using cycloid reducer drive, through the crank and slider mechanism driven double diaphragm reciprocating motion, so that the volume of working chambers to alternatively change so a ...