5083 Aluminum Plate Application
5083 Aluminum Plate Application
November 29, 2016, the first ship of liquefied natural gas (LNG) purchased from France begin to provide convenience for Peking Man.
Aluminum is the best material for the manufacture of LNG tanks because it is a very good cryogenic structural material, easy to form, weldability is good, the recovery rate of up to 95% or more. The ball is made up of three parts, the lower hemisphere called the "southern hemisphere", the middle part of what is called "equatorial ring", the upper hemisphere called "the northern hemisphere". Equatorial board thickness is 170mm, where the hull connected with the "apron" components equipped with a bracket, a variety of piping in the shelf.
Equatorial rings are made of 170mm thick plate. Canister covered with a composite insulation layer, to prevent the outside heat into the internal liquefied gas to maintain the -163 ℃. The outer layer of the composite insulation layer is a thin aluminum plate with two layers of plastic foam in the middle, one layer of phenol resin and another layer of rigid polyurethane foam. Each tank is used with 6000 sheets of heat shield, One screw is fastened to the tank body.
The tank and piping brackets are made of 5083-O aluminum alloy. Part of the "apron" is made of 5083-H321 alloy sheet with high strength. The amount of aluminum used in a large tank is about 750t and the amount of one vessel is about 3000t. In order to safely transport LNG, it is necessary to ensure the manufacturing quality of large cans, especially welding quality.
5083 Aluminum Plate
- Melting temperature 579 ℃ ~ 641 ℃
- Conductivity:29% IACS
- Thermal conductivity:117W/（m·℃）
- Specific heat capacity:900J/（kg·℃）
5083-O alloy has good low-temperature properties, -200 ℃ tensile strength Rm = 405N / mm2, higher than room temperature 40%, elongation of 43%, 22% higher than room temperature 95% LNG (about -155 ℃) equipped with good material.
We also provide aluminum sheet, aluminum slit coil, 5 bar aluminum tread plate, aluminum strip, anodizing aluminum coil, diamond aluminum tread plate, aluminum coil, and more. For further information on any of our products, please feel free to contact us via the phone number or email provided on our website.
As a China-based 5083 aluminum plate manufacturer and supplier, we also produce coated aluminum coil, aluminum plate, aluminium slit coil, aluminum strip, anodising aluminum sheet, embossed aluminum sheet, etc. For more detailed information, please continue browsing our website or feel free to contact us directly.
- 5000 series 5-bar Aluminum Tread Plate Alloy:5005/5052/5083/5754/5086/5182/5A02 Temper:O,H114,H22
- The major series of this series aluminum tread plate provided by Mintai includes 5005 5052 5083 5086 5154 5182 5251 5754 series etc. aluminum tread plate used as...
- 1000 series Aluminum circle/aluminum discs Alloy:AA1050,AA1060,AA1100
- 1000 Aluminum Circle Including:1050 aluminium circle sheet,1060 aluminium disk,1070 aluminium round sheet,1100 aluminium discs,1200 aluminium circle.,It is mainl...
- 2000 series Aluminium sheet Alloy:2014/2017/2024/2124/2219 Temper:O,T3,T361,T4,T451,T6,T81,T851,T86
- 2000 series Aluminium sheet:2014,2017,2024,2124,2219 aluminium sheet,temper:O,T3,T4,T451,T351,T361,T6,T81,T86,T651,T851,T86,T31,T62,T87,2000 aluminium sheet is W...
- Architectural aluminum cladding perforated panels
- Architectural aluminum cladding perforated panels Application:For the curtain wall, both outer-side and inner side/Ceiling/Underground/Airport/Bus station/Railwa...