You are here: > Home > News > >

Application of Al Si Alloy

Al Si alloy is a kind of forging and casting alloy with aluminum and silicon as the main component. Generally it contains silicon 11%. At the same time, a small amount of copper, iron and nickel are added to improve the strength. It’s density of 2.6 ~ 2.7g/cm3, heat conduction coefficient of 101 ~ 126W/ (M C), young's modulus 71.0GPa, impact value of 7 ~ 8.5J, and fatigue limit 45MPa.
 
Al Si alloy has the following uses:
 
1. In the silicon content of more than Al-Si eutectic point (Si 11.7%) of the aluminum silicon alloy, silicon particles can obviously improve the alloy's wear resistance, the composition of a wide range of wear resistant alloy.
 
2. Used in the manufacture of low strength of the shape of complex castings, such as cover, motor shell, bracket, etc., are also used as brazing solder.
 
3. Al Si alloy is a kind of strong composite material, in the process of making steel instead of pure aluminum can improve the utilization rate of the alloy, and can purify the steel liquid, improve the quality of steel. Aluminum deoxidation steel ingot, commonly referred to as, calm steel, due to aluminum deoxidation is oxidized into alumina can refine austenite grain, so the aluminum deoxidation steel has good comprehensive mechanical properties.
 
4. Silicon aluminum alloy density of small, low thermal expansion coefficient, good casting properties and wear resistance, the casting alloy castings with high ability against impact and good high pressure tight of, and the service life is greatly improved. Often used in the production of aerospace vehicle and auto parts.

http://www.mintai-aluminum-coils.com/a/products/Anodising_Aluminum_Sheet__Coil

http://www.mintai-aluminum-coils.com/a/products/Anodising_Aluminum_Sheet__Coil

 

Feedback

Name:
Email:
Tel.Fax:
Inquiry:
 
Other Products
Pharmaceutical packing blister PTP foil
Pharmaceutical packing blister PTP foil
  1. Aluminium foil for blister can be applied to blister packing for torches, pills, suppositories and foods, candies....
3000 series Aluminum Plate Alloy:3003/3004/3005/3105/3A21 Temper:HO,H12,H14,H16,H22,H24,H26
3000 series Aluminum Plate Alloy:3003/3004/3005/3105/3A21 Temper:HO,H12,H14,H16,H22,H24,H26
  1. 3000 series aluminum plate is Including:3003 aluminium plate,3004 aluminium plate,3005 aluminium plate,3105 aluminium plate,3A21 aluminium plate.used in constru...
Aluminum foil
Aluminum foil
  1. Alloy:1050 1100 1145 1200 1235 3003 3005 8011 Temper: O, H18, H24,H14, Thickness: 0.006mm- 0.2mm Width:80-1500mm aluminum foil is widely used in food,drink...
Wall Cladding Perforated Aluminum Solid Panel
Wall Cladding Perforated Aluminum Solid Panel
  1. Wall Cladding Perforated Aluminum Solid Panel Material:AA5754/AA3003/AA1100/ AA5005/AA1060,For the curtain wall, both outer-side and inner side/Ceiling/ Undergro...