You are here: > Home > News > >

How to prevent aluminum pin holes?

Welcome light in the visible surface of aluminum foil irregular holes called pinholes. With reduced thickness, increased number of pinholes is one of the major flaws foil.

Blank, the upper roll, rolling oil, dust in the air and even reach into the roll gap 6μm size will cause pinholes, so 65m aluminum foil pinholes is impossible, only the number and size of the evaluation it.
 
With the improvement of the level of installed equipment foil, aluminum foil rolling conditions can be improved, especially to set an effective dust and rolling oil filter and quick roll change system, so the number and size of pinholes Aluminum increasingly dependent on blank metallurgical quality and processing defects.
 
Because pinhole defects often blank off, it is difficult to find the correspondence between the original defects. Generally it believed that the pinhole mainly containing gas, mixed, compound and segregation related.
 
Take effective molten aluminum purification, filtration, etc. to help reduce grain refinement pinholes.
 
A means of improving the use of alloying material hardening properties also help reduce pinholes. Shoot high-quality billet aluminum foil rolling 6μm pinhole in 100 / m² or less. Aluminum foil rolling process, other factors causing pinholes are many, even catastrophic, thousands of pinholes per square meter is not unusual. Strengthen the rolling oil filter.
 
Roll short-term replacement and dust control measures are necessary to reduce the aluminum foil pinholes conditions; with large rolling force small tension rolling will help to reduce pinholes.

http://www.mintai-aluminum-coils.com/a/products/Aluminum_Foil/

Feedback

Name:
Email:
Tel.Fax:
Inquiry:
 
Other Products
5000 series 5-bar Aluminum Tread Plate Alloy:5005/5052/5083/5754/5086/5182/5A02 Temper:O,H114,H22
5000 series 5-bar Aluminum Tread Plate Alloy:5005/5052/5083/5754/5086/5182/5A02 Temper:O,H114,H22
  1. The major series of this series aluminum tread plate provided by Mintai includes 5005 5052 5083 5086 5154 5182 5251 5754 series etc. aluminum tread plate used as...
2000 series Aluminium sheet Alloy:2014/2017/2024/2124/2219 Temper:O,T3,T361,T4,T451,T6,T81,T851,T86
2000 series Aluminium sheet Alloy:2014/2017/2024/2124/2219 Temper:O,T3,T361,T4,T451,T6,T81,T851,T86
  1. 2000 series Aluminium sheet:2014,2017,2024,2124,2219 aluminium sheet,temper:O,T3,T4,T451,T351,T361,T6,T81,T86,T651,T851,T86,T31,T62,T87,2000 aluminium sheet is W...
Architectural aluminum cladding perforated panels
Architectural aluminum cladding perforated panels
  1. Architectural aluminum cladding perforated panels Application:For the curtain wall, both outer-side and inner side/Ceiling/Underground/Airport/Bus station/Railwa...
1000 series Aluminum circle/aluminum discs Alloy:AA1050,AA1060,AA1100
1000 series Aluminum circle/aluminum discs Alloy:AA1050,AA1060,AA1100
  1. 1000 Aluminum Circle Including:1050 aluminium circle sheet,1060 aluminium disk,1070 aluminium round sheet,1100 aluminium discs,1200 aluminium circle.,It is mainl...